-
August 29th, 2004, 06:29 AM
#1
Inactive Member
ok, the stockers on the 93 ain't cuttin it.
i have 15inch wheels. somebody point me to some bigger or better brakes.
will integra brakes fit or are they worth the hassle?
-
August 29th, 2004, 04:48 PM
#2
Inactive Member
You can use DOHC VTEC front brakes ('94-'97) or Intrega front brakes ('94-'00, maybe earlier years too, not sure), both are the same size. You will need the knuckle out, no need to change axles. For master Cylinder, one from a VTEC non ABS along with the booster does fine(also one from a '93 Cx hatch, part number 46100-SH4-A11 will work too(will bolt up to stock booster), both these are 15/16, that way you don't have to change or make brake lines. Don't have to change the proportioning valve it's the same one as the SI. Also the brake hoses are the same. Rear disks are the same on all three models.
That should give you a start with using factory upgrade parts. Pretty much plug and play on it. This is the easiest way to go, they're are other options to out there, but they cost more. Your choice.
Geo
President
Team Sol of Washington

<font color="#a62a2a" size="1">[ August 29, 2004 01:52 PM: Message edited by: Geo VP ]</font>
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks